How do I reset my Xerox toner chip?

Clear the Message and Reset the % Toner Remaining Value

1. Press the [Login In / Out] button on the Control Panel.
2. Select the [Keyboard] button on the Touch Screen.
3. Enter the username using the keypad on the Touch Screen, and then select [Next].
4. Enter the password, and then select [Done].

How do I reset my toner chip?

Push down all the pins on the resetter. Depending on the printer model, there may be a button rather than pins. Keep pushing the pins/button on the cartridge until the LED lamp on the cartridge turns green, or it indicates with a beeping sound that the toner cartridge has been reset.

How do you bypass toner chip?

To bypass your toner or ink chip you can do any of four things.

1. Use an auto-reset ink tanks if your printer models have them.
2. Fit your printer with a new chip or ink tank.
3. Use your printer model’s chip resetter to restore the “empty” chip to full.
4. Disable your ink or toner monitor.

How do I reset my toner chip 110a?

Power on the printer via the power switch, while still holding down the “Go” button. After a few seconds, the display screen on the printer will read “Cold Reset.” Continue pressing the “Go” button. You will hear the printer’s motors rotating inside the machine.

How can I fix my toner cartridge?

The most likely fix for this problem is to take the cartridge out. If it’s empty, replace it with a new cartridge. If it still has toner left inside, install it back in the printer, taking care to insert the cartridge properly. Always turn your printer off before attempting to change a cartridge.

How to reset% Toner remaining in Xerox copier?

If the Internal Auditron is not enabled, select the [Go To Tools] button (does not apply to copier-only models). If the Internal Auditron is enabled, select the [Tools Pathway] button. Select the [More] button. Select the [Consumables Management] button. Select the [Toner Cartridge Reorder Notification] button.

How do I Reset my Xerox supply life counter?

The Machine Status screen will be displayed on the Touch Screen. Select the [Tools] tab. Select the [Troubleshooting] button. Select [Resets], and then use the arrow buttons to select [Supply Counter Reset]. Select the required supply item, and then select [Reset Counter]. Select [Reset] when the confirmation screen is displayed. Select [Close].

Is there a way to reset the toner cartridge chip?

However, smart chips aren’t automatically reset after a cartridge is refilled, so your printer still thinks the cartridge has no toner and will not print. In this article, we’ll introduce you 5 steps on how to reset chip on toner cartridge. How Does A Toner Cartridge Chip Work?

What to do if your toner cartridge is not recognized?

Open the printer tray and put the cartridge back into your printer. The toner cartridge is now ready for use, and you can resume normal printing. Many customers report problems with toner cartridges not being recognized by smart chips or with chips saying that their toner is empty while the cartridge still has droplets available.